Home · Starter settings · xTool F2 Ultra / F1
xTool F2 Ultra / F1: starter settings
xTool's enclosed dual-laser F series. The F2 Ultra pairs a 40W blue diode with a 60W MOPA fiber; the original F1 pairs a 10W diode with a 2W IR laser.
Current deal
Recommended first burn settings
Basswood plywood 3mm: engrave
Basswood plywood 3mm: cut
304 stainless steel: engrave
Black acrylic 3mm: engrave
Basswood 3mm: engrave
Basswood 3mm: cut
Stainless steel: engrave
PLA Pro (black): engrave
PETG (black): engrave
Buyer FAQ
Which laser do I use for what on the F2 Ultra?
The 40W blue laser handles wood, paper, leather and cutting. The 60W MOPA infrared laser engraves metals like stainless steel, gold, silver, copper and aluminum.
What does MOPA add?
MOPA lets you adjust pulse width (2 to 500 ns) and frequency (30 to 4000 kHz) separately, which helps with fine detail and color engraving on metal.
How thick can the F2 Ultra cut?
xTool lists 23 mm wood, 20 mm acrylic, 2 mm stainless steel, 2 mm brass and 1 mm aluminum.
Can I cut on the conveyor?
No. Cutting through the material would hit and could damage the conveyor.
Does it work with LightBurn?
Yes, the F2 Ultra supports LightBurn V2.2.0 or later.
Can it engrave clear glass or acrylic?
Yes, but only with help such as black paint or art scratch paper to absorb the laser.
Does it resume after a power cut?
Yes, in flat-surface and relief engraving modes only.
Can the original F1 cut metal?
No. The F1's IR laser engraves metal. Its diode cuts 3 mm basswood, black acrylic up to 5 mm, leather and cardboard.
How big is the F1's work area?
115 × 115 mm, with a maximum engraving height of 113 mm.
First-week setup and maintenance
- Before a new material, run XCS's Material test array (Applications > Material test array) to find your own power and speed. xTool says its lab settings are reference only.
- For bitmap images, set dot duration above 100 μs for stable output, especially with the infrared laser; xTool says 100 to 500 is usually best. Use Jarvis mode for infrared and grayscale for blue light.
- Clean the exhaust fan with a soft brush. Don't rinse it with water.
- For offline jobs, export a .xf file (Settings > Device Settings > Export .xf). The machine stores 7 GB.
Common beginner mistakes
- Cutting on the conveyor, or relief engraving with it. Both can damage it.
- Using the rotary and the conveyor at the same time. Only one works at a time.
- Expecting a desktop smoke purifier to work in united mode. xTool recommends the AP2 for that.
- Trying to engrave clear glass or acrylic without paint or scratch paper.
Full settings list
All 38 xTool F2 Ultra settings · All 42 xTool F1 settings · All 69 xTool F1 Ultra settings · All 20 xTool F2 settings