xTool F1 Ultra / PLA Pro (black)

PLA Pro (black) on xTool F1 Ultra

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool F1 Ultra
Laser type
fiber
Wattage
20W
Material
PLA Pro (black)
Operation
engrave
Power
30%
Speed
4000 mm/s
Passes
1
Line interval / DPI
240 lpcm
Notes
Batch Studio highest-contrast engrave on Polymaker PLA Pro Black; XCS. Page labels this filament section 2W Fiber IR—F1 Ultra fiber is typically 20W; verify and test on scrap.
Source: Batch Studio
Summarized from the linked source. Always test on scrap before production runs.