Home · Starter settings · LaserPecker LP5
LaserPecker LP5: starter settings
Compact dual-laser engraver with a 20W blue diode and a 20W fiber laser. Settings below come from LaserPecker's official LP5 material chart first.
Recommended first burn settings
Basswood Plank 1 mm: cut
Acrylic: engrave
Cowhide: engrave
Stainless Steel 1 mm: engrave
Aluminum Oxide: engrave
Titanium: engrave
PLA (white) 3D print: mark
PETG (white) 3D print: mark
Buyer FAQ
What lasers does the LP5 have?
A 20W fiber laser and a 20W blue diode. The diode is best on wood, dark acrylic, leather, slate, glass and ceramic; the fiber engraves metals and plastic.
Can it cut metal?
Yes, 1 mm brass, stainless steel, aluminum and titanium sheet. It can also deep engrave and do 3D grayscale embossing.
LP5 vs LP4?
The LP5 runs up to 10,000 mm/s with 20W lasers. The LP4 tops out at 4,000 mm/s. Both have a 160 × 120 mm basic area, or 160 × 300 mm with the slide extension.
Does it come with a camera?
No bundle includes it. The camera comes with the Safety Enclosure, which is sold separately.
What software does it use?
LaserPecker Design Space (LDS) app and desktop software, and LightBurn.
What accessories work with it?
Slide extension, rotary extension (objects 1 to 145 mm in diameter), air purifier, safety enclosure, cutting plate and Powerpack Plus.
What Wi-Fi does it need?
The LP5 and your phone must be on the same 2.4 GHz network.
What room conditions does it need?
10 to 35 °C and 10 to 95% humidity, non-condensing.
First-week setup and maintenance
- Level the laser unit on the stand before first use, using the two adjustment holes on the arm.
- Focus with the dual red dots: adjust the stand until they meet. The recommended focal length is 152 mm (±2 mm).
- Remove the front light filter while previewing and put it back before engraving.
- Make sure the security key is inserted, or the machine won't run.
Common beginner mistakes
- Touching the lens while fitting the conical protective cover.
- Putting the phone on a 5 GHz network. The LP5 needs 2.4 GHz.
- Engraving with the front filter still off after previewing.
Full settings list
All 98 LaserPecker LP5 settings · All 8 LaserPecker LP2 / LP5 settings