Sculpfun S30 Pro / Plywood

Plywood (1/4in) on Sculpfun S30 Pro

youtube cut
Test on scrap first. Settings are starting points from the linked source.
Machine
Sculpfun S30 Pro
Laser type
diode
Material
Plywood
Thickness
1/4in
Operation
cut
Power
100%
Speed
4 mm/s
Passes
1
Air assist
On
Notes
Creator first set 2 passes, then confirmed it cut cleanly through in 1 pass with air assist. Test on scrap first.
Source: The Laser Channel · 2023-01-03
Summarized from the linked source. Always test on scrap before production runs.