OMTech 40W CO2 / MDF (high density board)

MDF (high density board) (5mm) on OMTech 40W CO2

official cut
Test on scrap first. Settings are starting points from the linked source.
Machine
OMTech 40W CO2
Laser type
CO2
Wattage
40W
Material
MDF (high density board)
Thickness
5mm
Operation
cut
Power
95%
Speed
3.5 mm/s
Passes
1
Notes
OMTech official cutting chart, "optimal speed" column at 95% power. Test on scrap first.
Source: OMTech
Summarized from the linked source. Always test on scrap before production runs.