Monport 40W CO2 / Plywood

Plywood (5mm) on Monport 40W CO2

official cut
Test on scrap first. Settings are starting points from the linked source.
Machine
Monport 40W CO2
Laser type
CO2
Wattage
40W
Material
Plywood
Thickness
5mm
Operation
cut
Power
45%
Speed
4 mm/s
Passes
1
Notes
Official Monport 40W CO2 Recommended Parameters via CutChart. Passes/air assist not stated by Monport; listed as 1 pass starting point. Test on scrap.
Source: Monport via CutChart · 2026-09-21
Summarized from the linked source. Always test on scrap before production runs.