Creality Falcon2 / Tile (surface painted with black ink)

Tile (surface painted with black ink) (6mm) on Creality Falcon2

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
Creality Falcon2
Laser type
diode
Wattage
40W
Material
Tile (surface painted with black ink)
Thickness
6mm
Operation
engrave
Power
28%
Speed
4000 mm/min
Passes
1
Notes
Official Creality Wiki Falcon2 40W recommended parameters. Focus and clean lens first; colors and batches vary — test on scrap.
Source: Creality Wiki · 2025-03-27
Summarized from the linked source. Always test on scrap before production runs.