LaserPecker LP2 / LP5 / Anodized aluminum

Anodized aluminum on LaserPecker LP2 / LP5

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
LaserPecker LP2 / LP5
Laser type
diode
Wattage
5-20W
Material
Anodized aluminum
Operation
engrave
Power
60-80%
Speed
90-100%
Passes
1
Notes
LaserPecker US support recommended starting parameters. Removes anodized layer. Speed here is LaserPecker app speed %, not mm/s. Fine-tune per batch.
Source: LaserPecker US · 2026-11-02
Summarized from the linked source. Always test on scrap before production runs.