Cast acrylic (3mm) on LaserPecker LP2 / LP5

official cut

Test on scrap first. Settings are starting points from the linked source.

Machine

LaserPecker LP2 / LP5

Laser type

diode

Wattage

5-20W

Material

Cast acrylic

Thickness

3mm

Operation

cut

Power

100%

Speed

30-50%

Passes

3-5

Notes

LaserPecker US support recommended starting parameters. LP5; remove protective film; frosted engrave. Speed here is LaserPecker app speed %, not mm/s. Fine-tune per batch.

Source: LaserPecker US · 2026-11-02

Summarized from the linked source. Always test on scrap before production runs.