LaserPecker LP2 / LP5 / Basswood

Basswood (3mm) on LaserPecker LP2 / LP5

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
LaserPecker LP2 / LP5
Laser type
diode
Wattage
5-20W
Material
Basswood
Thickness
3mm
Operation
engrave
Power
80-100%
Speed
60-80%
Passes
1
Notes
LaserPecker US support recommended starting parameters. Light engrave. Speed here is LaserPecker app speed %, not mm/s. Fine-tune per batch.
Source: LaserPecker US · 2026-11-02
Summarized from the linked source. Always test on scrap before production runs.