LaserPecker LP2 / Paint-coated plastic

Paint-coated plastic on LaserPecker LP2

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
LaserPecker LP2
Laser type
diode
Wattage
5W
Material
Paint-coated plastic
Operation
engrave
Power
70%
Speed
res 1k
Passes
1
Notes
Official LP2 5W 450nm material table: Fill at 1k resolution, Depth 1%. LaserPecker uses Power%/Depth% (not mm/s). Firmware may shift results; test on scrap.
Source: LaserPecker · 2026-11-02
Summarized from the linked source. Always test on scrap before production runs.