LaserPecker LP2 / Oxidized metal

Oxidized metal on LaserPecker LP2

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
LaserPecker LP2
Laser type
diode
Wattage
5W
Material
Oxidized metal
Operation
engrave
Power
100%
Speed
res 2k
Passes
1
Notes
Official LP2 5W 450nm material table: Fill at 2k resolution, Depth 5%. LaserPecker uses Power%/Depth% (not mm/s). Firmware may shift results; test on scrap.
Source: LaserPecker · 2026-11-02
Summarized from the linked source. Always test on scrap before production runs.