Creality Falcon2 / Walnut Plywood

Walnut Plywood (5mm) on Creality Falcon2

official cut
Test on scrap first. Settings are starting points from the linked source.
Machine
Creality Falcon2
Laser type
diode
Wattage
40W
Material
Walnut Plywood
Thickness
5mm
Operation
cut
Power
100%
Speed
10 mm/s
Passes
1
Notes
Manufacturer table via CutChart (Falcon2 40W (Normal mode)). Test on scrap; air assist/focus often not specified.
Source: Manufacturer via CutChart · 2026-10-02
Summarized from the linked source. Always test on scrap before production runs.