Polymer AR-15 magazine (Magpul PMAG) on Fiber laser 20W (generic Chinese)
youtube engraveTest on scrap first. Settings are starting points from the linked source.
Machine
Fiber laser 20W (generic Chinese)
Laser type
fiber
Wattage
20W
Material
Polymer AR-15 magazine (Magpul PMAG)
Operation
engrave
Power
15%
Speed
1200 mm/s
Passes
1
Frequency / pulse
30 kHz
Line interval / DPI
0.1 mm
Notes
Spoken in the video (Whisper transcript): final settings were a single crosshatch at 0 and 90 degrees, 0.1 mm line spacing, 1200 mm/s, 15% power, 30 kHz. His first try with aluminum-style settings (about 50% power, 500 mm/s, 25 kHz, crosshatch) melted the plastic and smoked. Ventilate; test on scrap.
Source: JefferyJ · 2019-05-03