Genmitsu Kortek 5W / Birch plywood

Birch plywood (3 mm) on Genmitsu Kortek 5W

blog engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
Genmitsu Kortek 5W
Laser type
diode
Wattage
5W
Material
Birch plywood
Thickness
3 mm
Operation
engrave
Power
~60%
Speed
6000 mm/min
Notes
Surface engraving: around 60% power at 6,000 mm/min gave solid dark results (clean cut speed ~230 mm/min, power not stated). Tested in LightBurn.
Source: Chris Hoffman (Hoffman Engineering) · 2025-11-25
Summarized from the linked source. Always test on scrap before production runs.