Sculpfun E1 Dual (12W diode) / Birch plywood (photo engraving)

Birch plywood (photo engraving) on Sculpfun E1 Dual (12W diode)

blog engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
Sculpfun E1 Dual (12W diode)
Laser type
diode
Wattage
12W
Material
Birch plywood (photo engraving)
Operation
engrave
Power
50%
Speed
6000 mm/min
Notes
Best photo-engraving results at 6,000 mm/min and 50% power, with a wide tonal range (kerf offset ~0.07 mm).
Source: Chris Hoffman (Hoffman Engineering) · 2026-09-14
Summarized from the linked source. Always test on scrap before production runs.