Monport GA60 MOPA / Coated aluminum business cards

Coated aluminum business cards on Monport GA60 MOPA

blog engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
Monport GA60 MOPA
Laser type
MOPA fiber
Wattage
60W
Material
Coated aluminum business cards
Operation
engrave
Power
50%
Speed
6000 mm/s
Passes
1
Frequency / pulse
~150 kHz
Line interval / DPI
0.03 mm
Notes
Settings landed on after LightBurn material-test grids (speed 1000-7000 mm/s vs 10-2000 kHz): 50% power, 6000 mm/s, frequency around 150 kHz, 0.03 mm interval, 1 pass, 200 ns Q-pulse; removed the coating cleanly. A first guess of 50% at 1000 mm/s went through into the aluminum and threw sparks.
Source: Chris Hoffman (Hoffman Engineering) · 2025-03-29
Summarized from the linked source. Always test on scrap before production runs.