CO2 gantry RF 40W / Leatherette

Leatherette on CO2 gantry RF 40W

community engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
CO2 gantry RF 40W
Laser type
CO2
Wattage
40W
Material
Leatherette
Operation
engrave
Power
30%
Speed
600 mm/s
Line interval / DPI
397 (unit not stated)
Notes
LaserTips.org CO2 gantry community entry "Leatherette" (RF 40W, Engraving), focus lens 38.1 mm (1.5"). Interval listed as 397 (unit not stated; values look like lines per inch). User-submitted, approved starting point; test on scrap.
Source: LaserTips.org community library (CO2 gantry)
Summarized from the linked source. Always test on scrap before production runs.