JPT UV 5W / Wood

Wood on JPT UV 5W

community engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
JPT UV 5W
Laser type
UV
Wattage
5W
Material
Wood
Operation
engrave
Speed
2000 mm/s
Frequency / pulse
20 kHz
Line interval / DPI
0.03 mm
Notes
LaserTips.org UV community entry "Wood" (5W JPT): Q-pulse 10 (on this page 1 = full power and higher values = less power; some UV sources are inverted), unidirectional hatch, angle 0. No power % listed. User-submitted starting point; test on scrap.
Source: LaserTips.org community library (UV) · 2025-11-06
Summarized from the linked source. Always test on scrap before production runs.