JPT UV 5W / White on Anodized Aluminium

White on Anodized Aluminium on JPT UV 5W

community engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
JPT UV 5W
Laser type
UV
Wattage
5W
Material
White on Anodized Aluminium
Operation
engrave
Speed
500 mm/s
Frequency / pulse
1 kHz
Line interval / DPI
0.01 mm
Notes
LaserTips.org UV community entry "White on Anodized Aluminium" (JPT 5W): Q-pulse 20 (on this page 1 = full power and higher values = less power; some UV sources are inverted), bi-dir hatch. No power % listed. User-submitted starting point; test on scrap.
Source: LaserTips.org community library (UV) · 2025-11-06
Summarized from the linked source. Always test on scrap before production runs.