JPT UV 5W / Stainless Steel 304

Stainless Steel 304 on JPT UV 5W

community engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
JPT UV 5W
Laser type
UV
Wattage
5W
Material
Stainless Steel 304
Operation
engrave
Speed
150 mm/s
Frequency / pulse
100 kHz
Line interval / DPI
0.0063 mm
Notes
LaserTips.org UV community entry "Stainless Steel 304" (JPT 5W): Q-pulse 1 (on this page 1 = full power and higher values = less power; some UV sources are inverted), bi-hatch hatch, angle 90, lens 150. Submitter note: "crosshatch". No power % listed. User-submitted starting point; test on scrap.
Source: LaserTips.org community library (UV) · 2026-09-10
Summarized from the linked source. Always test on scrap before production runs.