Rubber Wood on JPT UV 5W
community engraveTest on scrap first. Settings are starting points from the linked source.
Machine
JPT UV 5W
Laser type
UV
Wattage
5W
Material
Rubber Wood
Operation
engrave
Speed
80 mm/s
Frequency / pulse
10 kHz
Line interval / DPI
0.05 mm
Notes
LaserTips.org UV community entry "Rubber Wood" (JPT 5W): Q-pulse 60 (on this page 1 = full power and higher values = less power; some UV sources are inverted), bi-dir hatch. No power % listed. User-submitted starting point; test on scrap.
Source: LaserTips.org community library (UV) · 2025-11-06