Polyethylene Foam - Cutting on UV galvo 5W
community cutTest on scrap first. Settings are starting points from the linked source.
Machine
UV galvo 5W
Laser type
UV
Wattage
5W
Material
Polyethylene Foam - Cutting
Operation
cut
Speed
100 mm/s
Frequency / pulse
20 kHz
Line interval / DPI
0.04 mm
Notes
LaserTips.org UV community entry "Polyethylene Foam - Cutting" (UV 5W): Q-pulse 2 (on this page 1 = full power and higher values = less power; some UV sources are inverted), bi-dir hatch, lens 110. Submitter note: "cuts 25mm thick shadow board foam". No power % listed. User-submitted starting point; test on scrap.
Source: LaserTips.org community library (UV) · 2026-08-11