Maple Plywood on JPT UV 5W
community engraveTest on scrap first. Settings are starting points from the linked source.
Machine
JPT UV 5W
Laser type
UV
Wattage
5W
Material
Maple Plywood
Operation
engrave
Speed
90 mm/s
Frequency / pulse
45 kHz
Line interval / DPI
0.06 mm
Notes
LaserTips.org UV community entry "Maple Plywood" (JPT 5W): Q-pulse 0.8 (on this page 1 = full power and higher values = less power; some UV sources are inverted), bi-hatch hatch, angle 45, lens 330. No power % listed. User-submitted starting point; test on scrap.
Source: LaserTips.org community library (UV) · 2026-06-23