JPT UV 5W / Glass Marking (feeltek 3d)

Glass Marking (feeltek 3d) on JPT UV 5W

community mark
Test on scrap first. Settings are starting points from the linked source.
Machine
JPT UV 5W
Laser type
UV
Wattage
5W
Material
Glass Marking (feeltek 3d)
Operation
mark
Speed
400 mm/s
Passes
1
Frequency / pulse
50 kHz
Line interval / DPI
0.03 mm
Notes
LaserTips.org UV community entry "Glass Marking (feeltek 3d)" (JPT 5W): Q-pulse 1 (on this page 1 = full power and higher values = less power; some UV sources are inverted), unidirectional hatch, angle 0. No power % listed. User-submitted starting point; test on scrap.
Source: LaserTips.org community library (UV) · 2025-11-06
Summarized from the linked source. Always test on scrap before production runs.