Glass Engraving on JPT UV 10W
community engraveTest on scrap first. Settings are starting points from the linked source.
Machine
JPT UV 10W
Laser type
UV
Wattage
10W
Material
Glass Engraving
Operation
engrave
Speed
300 mm/s
Frequency / pulse
60 kHz
Line interval / DPI
0.05 mm
Notes
LaserTips.org UV community entry "Glass Engraving" (10W JPT): Q-pulse 1 (on this page 1 = full power and higher values = less power; some UV sources are inverted), bi-dir hatch, angle 0. Submitter note: "enable cross hatch". No power % listed. User-submitted starting point; test on scrap.
Source: LaserTips.org community library (UV) · 2025-11-06