JPT UV 5W / Engraved Steel with 5w UV

Engraved Steel with 5w UV on JPT UV 5W

community engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
JPT UV 5W
Laser type
UV
Wattage
5W
Material
Engraved Steel with 5w UV
Operation
engrave
Speed
300 mm/s
Frequency / pulse
35 kHz
Line interval / DPI
0.02 mm
Notes
LaserTips.org UV community entry "Engraved Steel with 5w UV" (JPT 5W): Q-pulse 10 (on this page 1 = full power and higher values = less power; some UV sources are inverted), cross-hatch hatch, angle 0, lens 175. Submitter note: "enable : flood fill". No power % listed. User-submitted starting point; test on scrap.
Source: LaserTips.org community library (UV) · 2025-11-13
Summarized from the linked source. Always test on scrap before production runs.