UV galvo 5W / Engrave Cardboard

Engrave Cardboard on UV galvo 5W

community engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
UV galvo 5W
Laser type
UV
Wattage
5W
Material
Engrave Cardboard
Operation
engrave
Speed
1000 mm/s
Passes
1
Frequency / pulse
25 kHz
Line interval / DPI
0.05 mm
Notes
LaserTips.org UV community entry "Engrave Cardboard" (UV 5W): Q-pulse 10 (on this page 1 = full power and higher values = less power; some UV sources are inverted), bi-dir hatch, angle 90. No power % listed. User-submitted starting point; test on scrap.
Source: LaserTips.org community library (UV) · 2025-11-06
Summarized from the linked source. Always test on scrap before production runs.