JPT UV 5W / Coconut Shell

Coconut Shell on JPT UV 5W

community engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
JPT UV 5W
Laser type
UV
Wattage
5W
Material
Coconut Shell
Operation
engrave
Speed
100 mm/s
Frequency / pulse
20 kHz
Line interval / DPI
0.03 mm
Notes
LaserTips.org UV community entry "Coconut Shell" (JPT 5W): Q-pulse 10 (on this page 1 = full power and higher values = less power; some UV sources are inverted), bi-dir hatch, lens 174. Submitter note: "bi-directional fill, diffusion fill". No power % listed. User-submitted starting point; test on scrap.
Source: LaserTips.org community library (UV) · 2026-05-27
Summarized from the linked source. Always test on scrap before production runs.