JPT UV 10W / Black on Stainless Steel 10w

Black on Stainless Steel 10w on JPT UV 10W

community engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
JPT UV 10W
Laser type
UV
Wattage
10W
Material
Black on Stainless Steel 10w
Operation
engrave
Speed
100 mm/s
Frequency / pulse
50 kHz
Line interval / DPI
0.05 mm
Notes
LaserTips.org UV community entry "Black on Stainless Steel 10w" (JPT 10W): Q-pulse 1 (on this page 1 = full power and higher values = less power; some UV sources are inverted), bi-dir hatch. No power % listed. User-submitted starting point; test on scrap.
Source: LaserTips.org community library (UV) · 2025-11-06
Summarized from the linked source. Always test on scrap before production runs.