JPT UV 5W / Birch Plywood

Birch Plywood on JPT UV 5W

community engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
JPT UV 5W
Laser type
UV
Wattage
5W
Material
Birch Plywood
Operation
engrave
Speed
250 mm/s
Frequency / pulse
40 kHz
Line interval / DPI
0.04 mm
Notes
LaserTips.org UV community entry "Birch Plywood" (JPT 5W): Q-pulse 1 (on this page 1 = full power and higher values = less power; some UV sources are inverted), bi-dir hatch. No power % listed. User-submitted starting point; test on scrap.
Source: LaserTips.org community library (UV) · 2025-11-06
Summarized from the linked source. Always test on scrap before production runs.