JPT UV 3W / Acrylic Engraving

Acrylic Engraving on JPT UV 3W

community engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
JPT UV 3W
Laser type
UV
Wattage
3W
Material
Acrylic Engraving
Operation
engrave
Speed
1000 mm/s
Frequency / pulse
40 kHz
Line interval / DPI
0.02 mm
Notes
LaserTips.org UV community entry "Acrylic Engraving" (3W JPT): Q-pulse 1 (on this page 1 = full power and higher values = less power; some UV sources are inverted), bi-dir hatch, angle 0. Submitter note: "a 1". No power % listed. User-submitted starting point; test on scrap.
Source: LaserTips.org community library (UV) · 2025-11-06
Summarized from the linked source. Always test on scrap before production runs.