Silicon Plastic on JPT fiber 50W
community engraveTest on scrap first. Settings are starting points from the linked source.
Machine
JPT fiber 50W
Laser type
fiber
Wattage
50W
Material
Silicon Plastic
Operation
engrave
Power
20%
Speed
800 mm/s
Frequency / pulse
5 kHz
Line interval / DPI
0.5 mm
Notes
LaserTips.org community entry "Silicon Plastic" (50W JPT): cross-hatch hatch, angle 90, pulse width 200 ns. User-submitted, moderated starting point; test on scrap.
Source: LaserTips.org community library