Raycus fiber 30W / PETG Plastic

PETG Plastic on Raycus fiber 30W

community engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
Raycus fiber 30W
Laser type
fiber
Wattage
30W
Material
PETG Plastic
Operation
engrave
Power
30%
Speed
500 mm/s
Passes
1
Frequency / pulse
30 kHz
Line interval / DPI
0.03 mm
Notes
LaserTips.org community entry "PETG Plastic" (Raycus 30W): unidirectional hatch, angle 0, loops 1, lens 210mm. User-submitted, moderated starting point; test on scrap.
Source: LaserTips.org community library
Summarized from the linked source. Always test on scrap before production runs.