JPT M7 MOPA 30W / Mopa-stainless-black Annealing

Mopa-stainless-black Annealing on JPT M7 MOPA 30W

community engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
JPT M7 MOPA 30W
Laser type
MOPA fiber
Wattage
30W
Material
Mopa-stainless-black Annealing
Operation
engrave
Power
20%
Speed
150 mm/s
Passes
1
Frequency / pulse
60 kHz
Line interval / DPI
0.002 mm
Notes
LaserTips.org community entry "Mopa-stainless-black Annealing" (MOPA M7 30W): bi-dir hatch, angle 0, pulse width not listed, loops 1, lens 150x150. User-submitted, moderated starting point; test on scrap.
Source: LaserTips.org community library
Summarized from the linked source. Always test on scrap before production runs.