MOPA fiber 60W / Mirror

Mirror on MOPA fiber 60W

community engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
MOPA fiber 60W
Laser type
MOPA fiber
Wattage
60W
Material
Mirror
Operation
engrave
Power
40%
Speed
1000 mm/s
Frequency / pulse
75 kHz
Line interval / DPI
0.042 mm
Notes
LaserTips.org community entry "Mirror" (Mopa 60): bi-dir hatch, angle 0, pulse width 200 ns, lens 175. Submitter note: "Lightburn was what i used". User-submitted, moderated starting point; test on scrap.
Source: LaserTips.org community library
Summarized from the linked source. Always test on scrap before production runs.