Raycus fiber 30W / Dogtags Steinless Steel

Dogtags Steinless Steel on Raycus fiber 30W

community engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
Raycus fiber 30W
Laser type
fiber
Wattage
30W
Material
Dogtags Steinless Steel
Operation
engrave
Power
70%
Speed
300 mm/s
Frequency / pulse
20 kHz
Line interval / DPI
0.04 mm
Notes
LaserTips.org community entry "Dogtags Steinless Steel" (Raycus 30W): unidirectional hatch, angle 90, loops 0, lens 100x100. Submitter note: "all calc". User-submitted, moderated starting point; test on scrap.
Source: LaserTips.org community library
Summarized from the linked source. Always test on scrap before production runs.