JPT fiber 50W / Cut Brass 0.5mm

Cut Brass 0.5mm (0.5 mm) on JPT fiber 50W

community cut
Test on scrap first. Settings are starting points from the linked source.
Machine
JPT fiber 50W
Laser type
fiber
Wattage
50W
Material
Cut Brass 0.5mm
Thickness
0.5 mm
Operation
cut
Power
90%
Speed
70 mm/s
Frequency / pulse
50 kHz
Notes
LaserTips.org community entry "Cut Brass 0.5mm" (JPT 50w): bi-dir hatch. Submitter note: "Wobble Diameter/Distance 0.01mm". User-submitted, moderated starting point; test on scrap.
Source: LaserTips.org community library
Summarized from the linked source. Always test on scrap before production runs.