JPT fiber / Cut Aluminum

Cut Aluminum on JPT fiber

community cut
Test on scrap first. Settings are starting points from the linked source.
Machine
JPT fiber
Laser type
fiber
Material
Cut Aluminum
Operation
cut
Power
95%
Speed
100 mm/s
Passes
100
Frequency / pulse
20 kHz
Notes
LaserTips.org community entry "Cut Aluminum" (50 JPT): loops 100. Submitter note: "Wobble param on both : 0.05". User-submitted, moderated starting point; test on scrap.
Source: LaserTips.org community library
Summarized from the linked source. Always test on scrap before production runs.