Raycus fiber 30W / Brass Coins

Brass Coins on Raycus fiber 30W

community engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
Raycus fiber 30W
Laser type
fiber
Wattage
30W
Material
Brass Coins
Operation
engrave
Power
50%
Speed
200 mm/s
Frequency / pulse
20 kHz
Line interval / DPI
0.01 mm
Notes
LaserTips.org community entry "Brass Coins" (Raycus 30W): unidirectional hatch, angle 0, loops 0, lens 150x150mm. Submitter note: "All calc". User-submitted, moderated starting point; test on scrap.
Source: LaserTips.org community library
Summarized from the linked source. Always test on scrap before production runs.