Raycus fiber 30W / Black on Stainless Steel (raycus 30W)

Black on Stainless Steel (raycus 30W) on Raycus fiber 30W

community engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
Raycus fiber 30W
Laser type
fiber
Wattage
30W
Material
Black on Stainless Steel (raycus 30W)
Operation
engrave
Power
30%
Speed
200 mm/s
Passes
1
Frequency / pulse
60 kHz
Line interval / DPI
0.01 mm
Notes
LaserTips.org community entry "Black on Stainless Steel (raycus 30W)" (Raycus 30W): bi-dir hatch, angle 0, loops 1, lens 290. User-submitted, moderated starting point; test on scrap.
Source: LaserTips.org community library
Summarized from the linked source. Always test on scrap before production runs.