Raycus fiber 30W / 0.4mm Cutting Brass with Wobble No Hatch - Outline Only

0.4mm Cutting Brass with Wobble No Hatch - Outline Only (0.4 mm) on Raycus fiber 30W

community cut
Test on scrap first. Settings are starting points from the linked source.
Machine
Raycus fiber 30W
Laser type
fiber
Wattage
30W
Material
0.4mm Cutting Brass with Wobble No Hatch - Outline Only
Thickness
0.4 mm
Operation
cut
Power
100%
Speed
50 mm/s
Passes
13
Frequency / pulse
20 kHz
Notes
LaserTips.org community entry "0.4mm Cutting Brass with Wobble No Hatch - Outline Only" (Raycus 30W): bi-dir hatch, loops 13. Submitter note: "wobble Diameter 0.05. Distance 0.03". User-submitted, moderated starting point; test on scrap.
Source: LaserTips.org community library
Summarized from the linked source. Always test on scrap before production runs.