Black PLA (3D printed) on xTool S1 (2W IR module)
community engraveTest on scrap first. Settings are starting points from the linked source.
Machine
xTool S1 (2W IR module)
Laser type
IR fiber
Wattage
2W
Material
Black PLA (3D printed)
Operation
engrave
Power
~10%
Speed
150 mm/s
Line interval / DPI
300 lines/cm
Notes
Creator's own test: 'around 10% power, 150 mm/s and 300 lines/cm give a crisp, almost white mark. 100% just burns it.' Approximate values from one maker; test on scrap.
Source: Hexamake · 2026-11-14