Bambu Lab H2S / Bambu MDF Board

Bambu MDF Board (3mm) on Bambu Lab H2S

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
Bambu Lab H2S
Laser type
diode
Wattage
10W
Material
Bambu MDF Board
Thickness
3mm
Operation
engrave
Power
50%
Speed
120 mm/s
Passes
1
Air assist
On
Line interval / DPI
0.1 mm
Notes
Bambu Lab official material preset (Laser Fill, H2S 10W laser module), made for Bambu-branded material. Test on scrap first.
Source: Bambu Lab
Summarized from the linked source. Always test on scrap before production runs.