Wood (Pine / Black) on ComMarker B4 MOPA
blog markTest on scrap first. Settings are starting points from the linked source.
Machine
ComMarker B4 MOPA
Laser type
MOPA fiber
Wattage
60W
Material
Wood (Pine / Black)
Operation
mark
Power
20% (min 7%)
Speed
35 mm/s
Passes
1
Frequency / pulse
50 kHz
Line interval / DPI
0.2 mm
Notes
Starting preset from this machine's LightBurn library (MarkParam.clb), marked "not yet verified" by the source. Pulse width not set in entry (LightBurn default 200 ns shown). Mode Fill (Scan); 126 x 126 mm field. Test on scrap.
Source: Henry Elsner (Hank) III