ComMarker B4 MOPA / Powder Coat (Rotary Removal)

Powder Coat (Rotary Removal) on ComMarker B4 MOPA

blog engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
ComMarker B4 MOPA
Laser type
MOPA fiber
Wattage
60W
Material
Powder Coat (Rotary Removal)
Operation
engrave
Power
30% (min 7%)
Speed
750 mm/s
Passes
1
Frequency / pulse
80 kHz
Line interval / DPI
0.02 mm
Notes
Starting preset from this machine's LightBurn library (MarkParam.clb), marked "not yet verified" by the source. Pulse width not set in entry (LightBurn default 200 ns shown). Mode Fill (Scan); 126 x 126 mm field. Test on scrap.
Source: Henry Elsner (Hank) III
Summarized from the linked source. Always test on scrap before production runs.