ComMarker B4 MOPA / Gold 10–14K (cut)

Gold 10–14K (cut) on ComMarker B4 MOPA

blog cut
Test on scrap first. Settings are starting points from the linked source.
Machine
ComMarker B4 MOPA
Laser type
MOPA fiber
Wattage
60W
Material
Gold 10–14K (cut)
Operation
cut
Power
45% (min 7%)
Speed
100 mm/s
Passes
1
Frequency / pulse
37 kHz
Line interval / DPI
0.002 mm
Notes
Starting preset from this machine's LightBurn library (MarkParam.clb), marked "not yet verified" by the source. Pulse width not set in entry (LightBurn default 200 ns shown). Mode Line (Cut); 126 x 126 mm field; 45° hatch, cross-hatch. Test on scrap.
Source: Henry Elsner (Hank) III
Summarized from the linked source. Always test on scrap before production runs.