ComMarker B4 MOPA / Aluminum (Catalyst / Brilliance Laser Ink)

Aluminum (Catalyst / Brilliance Laser Ink) on ComMarker B4 MOPA

blog engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
ComMarker B4 MOPA
Laser type
MOPA fiber
Wattage
60W
Material
Aluminum (Catalyst / Brilliance Laser Ink)
Operation
engrave
Power
16% (min 12%)
Speed
110 mm/s
Passes
1
Frequency / pulse
50 kHz
Line interval / DPI
0.025 mm
Notes
Starting preset from this machine's LightBurn library (MarkParam.clb), marked "not yet verified" by the source. Pulse width not set in entry (LightBurn default 200 ns shown). Mode Fill (Scan); 126 x 126 mm field; 45° hatch, cross-hatch. Test on scrap.
Source: Henry Elsner (Hank) III
Summarized from the linked source. Always test on scrap before production runs.