ComMarker B4 MOPA / Stainless steel (black anneal)

Stainless steel (black anneal) on ComMarker B4 MOPA

blog mark
Test on scrap first. Settings are starting points from the linked source.
Machine
ComMarker B4 MOPA
Laser type
MOPA fiber
Wattage
60W
Material
Stainless steel (black anneal)
Operation
mark
Power
15% (min 7%)
Speed
330 mm/s
Passes
1
Frequency / pulse
190 kHz
Line interval / DPI
0.025 mm
Notes
Saved preset (Saved preset (derived from library entry Steel / General / Anneal)). Pulse width not set in entry (LightBurn default 200 ns shown). Mode Fill (Scan); 126 x 126 mm field; 45° hatch, cross-hatch. Test on scrap.
Source: Henry Elsner (Hank) III
Summarized from the linked source. Always test on scrap before production runs.