AtomStack M4 / Metal (bitmap photo)

Metal (bitmap photo) on AtomStack M4

manual engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
AtomStack M4
Laser type
IR fiber
Wattage
5W
Material
Metal (bitmap photo)
Operation
engrave
Power
100%
Speed
200 (unit not stated; likely mm/s)
Passes
1
Line interval / DPI
300 DPI
Notes
Official AtomStack M4 manual, black-and-white picture (ordinary bitmap) settings: grayscale checked, fixed DPI x300 y300, lattice point, two-way scanning, dotting time 0.4–0.5 ms, adjustment point power checked. Test on scrap.
Source: AtomStack · 2024-06-13
Summarized from the linked source. Always test on scrap before production runs.